Klick hier für die deutschsprachige Version.
At this column you can learn to create your own egg-O-shOOter.
|<<< Leveldependent parameters pollen >>>|
Number of simultaneously painted pollen. If a pollen disappears at the edge of the screen or is hit, a new one appears immediately.
Minimum value is 0, maximum 200, standard is 0.
If this variable is set to 1 (=standard), the pollen are influenced by altering speed whenever a speed egg is hit or bonuses are dealt. The value 0 turns the speed influence OFF.
Chance for the appearance of a special pollen. The sum of the single chances is related to 100%.
Minimum value is 0, maximum 1000, standard is 50.
Sets the diameter of the pollen.
Minimum value is 1, maximum 1000, standard is 100.
Vertical range wherein the pollen start.
Minimum value is -1000, maximum +1000, standard is -300 (XMin) and +300 (XMax).
Horizontal range wherein the pollen start. If no sign is given, the pollen start at the left AND right of the middle line of the playground. The left pollen move to the right, the right pollen to the left (bidirectional).
Minimum value is -FraqmeWidth, maximum +FrameWidth, standard is -300 (XMin) and +300(XMax).
Let's talk about the movement of pollen:
Pollen are moving along a trajectory to the left or right side. These trajectories are sinusoidal oscillations, given by the values oscillation and elongation. PollenOscillation means the number of oscillations done when moving sidewards. The more oscillations, the more often the pollen move up and down (top part of the graphic).
The bigger the elongation, the wider the trajectory will become (bottom part of the graphic).
Sets the speed of the pollen while moving along the trajectory. Negative values cause movement to the left, positive values to the right side. Without a given sign the direction is 'diced'.
Minimum value is -1000, maximum +1000, standard is +100.
Positive values cause clockwise rotation , negative values anticlockwise rotation. Without a sign the rotation direction is 'diced' (bidirectional).
Minimum value is -1000, maximum +1000, standard is 0.
Sets the elongation of the pollen. If no sign is given, the pollen move (beginning from the starting point) as well up- as downwards (bidirectional).
Minimum value is -1000, maximum +1000, standard is 50.
Sets the number of oscillations. The here given value is devided by 10.
Minimum value is 0, maximum 100, standard is 10.
There are by now 4 types of pollen:
0=No hit detection
1=Hit detection with image replacement (bubble01.bmp becomes bubble01_hit.bmp)
2=Hit detection with bursting
3=Hit detection without changing anything
Standard is 0
See chapter bonunses / maluses.
|<<<Back to parameters bubbles Continue with parameters icicles>>>|